|
The Tom-E-Boy™ 150 is a small electric radio control model airplane kit, designed with influence from the famous Vic Smeed Tomboy, to bring back that nostalgic feeling of yesteryear. The laser cut electric radio control Tom-E-Boy™ 150 kit is super easy to build and easy enough for a beginner to learn how to fly with some friendly help.
The Tom-E-Boy™ 150 was designed using a state of the art 3D CAD package, to allow for exceptional interlocking parts design and fit. 3D design also allows us to provide clearer assembly images, without having to use photos.
The Tom-E-Boy™ 150 model airplane kit is built from self-jigging interlocking laser cut balsa and plywood parts. It's like a 3D jigsaw puzzle with instructions. Although not needed for building, full size plans are included for reference. If the instructions are read before hand and followed during the build, the Tom-E-Boy™ 150 can be built up and ready to fly in only 2 to 4 evenings.
Specifications:
- Wingspan: 30.25 in
- Length: 19.4 in
- Wing Area: 159 sq in
- Flying Weight: 4.5 to 5.0 oz
- Wing Loding: 4.0 to 4.5 oz/sq ft
- Controls: 3 (Elevator, Rudder, Throttle)
- Power: D1811-2000 Outrunner
- Battery: 2S-300 to 2S-360 Rhino or PolyQuest LiPo
Kit Contents:
- Laser Cut balsa and plywood
- Complete Hardware and wheels
- Full Size Plans
|
|
Items Needed to Complete:
- Power: D1811-2000 Outrunner
- 6 Amp ESC (Feigao or Mountain Models)
- 2 ea. 3.7 gram Servos (Power HD or Mountain Models)
- Battery (2S-300 to 2S-360 Rhino or PolyQuest LiPo)
- Micro RX (Berg 4L or Spektrum 6115e)
- GWS 6x3 HD Prop
- Transmitter (3 channel+)
- 1 Roll So-Lite Covering (NOT HEAVIER COVERINGS)
Tools Needed:
- Hobby knife and blades
- Ruler
- Pliers, screwdrivers, etc.
- 5 Minute Epoxy
- Thin or Thick CA
- Soldering Iron
- Soldering paste/flux
- Solder
|
The current version of the manual is 1.0: Tom-E-Boy 150 Manual
|
| 
Airplane Kits
Indoor
