The MercurE™ is a small model designed to bring back that nostalgic feeling of yesteryear, in a small field electric package. Taking inspiration from the original Mercury, we developed the 32 inch MercurE™, which resulted in a super lightweight, nostalgic, and relaxingly smooth flying plane.
The MercurE™ was designed using a state of the art 3D CAD package, to allow for exceptional interlocking parts design and fit. 3D design also allows us to provide clearer assembly images, without having to use photos.
The MercurE™ is built from self-jigging interlocking laser cut balsa and plywood parts. It's like a 3D jigsaw puzzle with instructions. If the instructions are read before hand and followed during the build, the MercurE™ can be built up and ready to fly in only a few evenings.
Specifications:
- Wingspan: 31.6 in
- Length: 20.6 in
- Wing Area: 153 sq in
- Flying Weight: 4.9 to 5.4 oz
- Wing Loding: 4.6 to 5.1 oz/sq ft
- Controls: 3 (Elevator, Rudder, Throttle)
- Power: D1811-2000 Outrunner
- Battery: 2S-300 to 2S-360 Rhino or PolyQuest LiPo
Kit Contents:
- Laser Cut balsa and plywood
- Complete Hardware and wheels
- Full Size Plans
|
|
Items Needed to Complete:
- Power: D1811-2000 Outrunner
- 6 Amp ESC (Feigao or Mountain Models)
- 2 ea. 3.7 gram Servos (Power HD or Mountain Models)
- Battery (2S-300 to 2S-360 Rhino or PolyQuest LiPo)
- Micro RX (Berg 4L or Spektrum 6115e)
- GWS 6x3 HD Prop
- Transmitter (3 channel+)
- 1 Roll So-Lite Covering (NOT HEAVIER COVERINGS)
Tools Needed:
- Hobby knife and blades
- Ruler
- Pliers, screwdrivers, etc.
- 5 Minute Epoxy
- Thin or Thick CA
- Soldering Iron
- Soldering paste/flux
- Solder
|
The current version of the manual is 1.0: MercurE Manual
|
|