The 54 inch Tyro150 was designed in 3D CAD to be an outstanding tricycle gear electric trainer.

Its large 54” wingspan makes it easy to see, the light wing loading lets it fly slowly, and tricycle landing gear helps make landings easier, while still being a lot of fun for the experienced pilot.

All laser cut balsa and plywood make it super easy and fast to assemble.

The kit is as complete as you can get and includes a TON of hardware, listed in the specifications tab abve.

 

Specifications: Wingspan: 54 in Length: 45.5 in Wing Area: 558 sq in Flying Weight: 37 to 45 oz Wing Loding: 9.5 to 11.6 oz/sq ft Controls: 4 (Rudder, Elevator, Ailerons (2 servos), Throttle) Power: 150 to 250 Watt Brushless Outrunner Battery: 3S LiPo (Capacity sized to chosen motor) Kit Contents: 26 Sheets Laser Cut wood Clear Vac-Formed Cowling Pre-Bent Landing Gear Wire! DuBro Steerable Nose Gear DuBro Wheels EZ Servo Connectors Pushrods, Housings, and Clevises Hatch Magnets Screws, Velcro, Etc.

Items Needed to Complete: Motor Speed Control Battery 4 Channel RX and TX 4 ea. Hitec HS-81 Servos (or similar) 2 ea. 12" Servo Extensions 1 ea. Servo Y-Extension for Aileron Servos 2 ea. Rolls Solarfilm or SoLite Covering Tools Needed: Hobby knife and blades Ruler Covering Iron Sandpaper Thin and Thick CA 5 to 15 minute epoxy Soldering Iron Soldering paste/flux Solder

Model by "Turbo Joe", Picture by "Vintauri"

VIDEO 1: Video by "TurboJoe" (5.02 MB)

The current version of the manual is 1.0: Tyro 150 Manual (2.78 MB)