|
The EVA™ (Extremely Versitile Aircraft) is a flexible airplane that can accept a number of different wing options by simply unbolting one wing and sliding on another. The Eva Sport™ has a longer wing as is an easy flyer. The Eva Bipe™ has a 31" wingspan and has good aerobatic capabilities. The Eva 3D™ was designed for great 3D performance. Switching between models is as simple as ordering and building a new wing set, so you can start out with the Sport version and move up to the 3D or Bipe versions when you want.
The Eva™ was designed to assemble quickly and easily. The parts are laser cut and the kit is almost foolproof with precise interlocking pieces designed with AutoCAD. The wings plug into a carbon fiber spar. The landing gear is pre-bent 6061 T6 aluminum and the wheels and pushrods are included with the kit. Both a CD Rom style firewall mount and a GWS style stick motor mount are provided. The mounts bolt onto the fuselage, allowng easy swapping.
The Eva™ is designed to fly with a brushless motor capable of 100 watts or more. It will also fly with a GWS EPS350C-C but will not be capable of 3D maneuvers with this motor.
|
Specifications:
-
Wingspan: 41"
-
Wing Area: 369 sq in
-
Length: 32 in
-
Weight: 12 oz without battery
-
Wing Loading: 5.9 - 6.5 oz/sq
ft
-
Channels: 5 (Aileron x 2, Elevator, Rudder, Motor)
Kit
Contents:
- Laser
cut wood
- Lightweight Aluminum Landing Gear
- Wheels
- Pushrods and Housings
- Servo Connectors
- Misc. hardware
Tools Needed:
- Sharp knife (#11 X-Acto)
- Sealing Iron for covering
- Sandpaper
- Screwdrivers
- Needle Nose Pliars
|
|
Items Needed to Complete:
- 2 Rolls SoLite (Covering)
- Thin and Thick CA
- 4+ Ch Radio
- 4 Servos (GWS Picos, HS 55, or similar)
- 4+ Ch Receiver
- Y-Connector (If your TX does not have 2 aileron servo mixing)
Minimum Power:
- GWS EPS350c-C
- 9.6V 650 KAN NiMH Battery
Recommended Power:
- 100+ Watt Brushless Motor (Geared stick-mount or Outrunner
- 3S 1500 MAh LiPo
|
|
| 
Airplane Kits
Indoor
