QF2 DLG Full Kit


The QF2 is unavailable at this time, due to the lack of booms. We are looking for a new source and will get the QF-2 back into production as soon as possible.

The QF2 is a Discus-Launch-Glider built up from laser cut balsa parts and carbon fiber components. It has been designed as an inexpensive great flying DLG that is capable of 120 foot launches and is easy to build.

The kit includes all laser cut balsa, tapered wrapped CF tailboom, CF material for spar strengthening, fiberglass for reinforcing the tails and fuselage, CAD drawn plans, push rods and housings, and misc. hardware.

Discussion, builds, and the evolution of the QF2 can be found on R/C Groups HERE.

Discussion on the QF2 can be found HERE.


  • Wingspan: 50"
  • Wing Area: 259 sq in
  • Aspect Ratio: 9.7
  • Weight: 6.5 to 7.5 oz
  • Loading: 3.5 to 4.0 oz/sq ft
  • Airfoil: Drela AG-36

Kit Contents:

  • Laser cut balsa and plywood
  • Lightweight tapered carbon fiber tail boom
  • Carbon fiber for spar strengthening
  • Fiberglass for fuselage and tails
  • Pushrods and pushrod housings
  • Full size CAD drawn plans
  • Misc. hardware

Tools Needed:

  • Sharp knife (#11 X-Acto)
  • Sandpaper
  • Razor plane (better) or sanding block

Items Needed to Complete:

  • Thin and thick CA
  • 5 minute epoxy
  • Minwax Polycrylic or epoxy finishing resin for fiberglassing parts
  • 2+ Ch Radio
  • 2 Servos (GWS Pico, HS-55, or similar)
  • Receiver
  • RX Battery (4 cell 370mAh NiMH or smaller)

The current version is 1.0

QF2 Manual, Version 1.0 (2.0 MB)

There are  0  items available.
Item will usually ship in 1-7 days
Unless this is an item on clearance
We will email you the expected date

Select quantity:   
We Also Recommend :

Use keywords to find the product you are looking for.
Advanced Search
Account Login
Email Address


Forgot Password?
0 items
What's New?
Mountain Models & Laser Arts
2935 N Lynndale Drive
Appleton, WI 54914