Decals not included

The Mountain Models Clipped Wing Cub was CAD designed to be a lightweight, super easy to fly, laser-cut, scale electric parkflyer.

Interlocking laser-cut balsa and plywood parts make assembling the models as easy and as fast as possible.

The most complete hardware set you've ever wanted is included so the only things you have to add are covering, power system, and radio.

Designed in the thin air at 6000 feet, the cub flies beautifully and has plenty of flying power on a simple 80 watt brushless outrunner. The plane in the pictures weighs a paultry 13.6 ounces ready to fly! (Yes, that does includes everything, even a 2S1200 mAh LiPo) It is still plenty durable and the structure was not compromised to hit this weight. Compare this plane to a Chinese BARF that weighs twice what ours does!

This product contains the following items: » 1 x J-3 Cub Fuselage Kit      $66.00 » 1 x J-3 Clipped Wing Kit      $33.00 Cost of separate parts: $99.00 You save $11.00

 

Specifications: Wingspan: 37.9 in Length: 30 in. Wing Area: 259 sq in Weight: 13 - 16.5 oz (Yes, we really did hit 13 oz with a brushless outrunner and LiPo battery!) Loading: 7.2 - 9.1 oz/sq ft Controls: 4 (Rudder, elevator, ailerons (2 servos), throttle Power: 350 sized Brushed or Brushless power systems. Piloting: Fairly stable, could be 1st aerobatic trainer Building: "Could be a first balsa build" Kit Contents: Laser cut balsa and plywood Vac-formed cowling and engines 2 in. DuBro main wheels, 1" DuBro tail wheel  DuBro Micro Servo Connectors  DuBro Micro EZ Links  Nylon wing bolts Hatch magnets All wire for scale landing gear, pushrods, etc. All other hardware needed, including screws, bolts, nuts, etc. Includes 3 motor mounts; stick mount, rear firewall mount, and front firewall mount. Includes Full-Size plans. Tools Needed: Sharp knife (#11 X-Acto) Sealing Iron and iron socks Sanding block with 320 and 400 grit sandpaper Screwdrivers Needle nose pliers Wire bender or pliers Wire cutters Plastic wrap or wax paper

Items Needed to Complete: 1 roll lightweight covering (SoLite or similar) Optional: Extra covering or trim sheets for detail work as desired for finish Paint for cowling and engine details  Thin and thick CA Epoxy, 5 to 10 minute 4 channel transmitter minimum Micro receiver, 4 ch. minimum 2 ea. HS-55 servos (or similar) for rudder and elevator 2 ea. GWS Pico/Naro servos (or similar) for ailerons  2 ea. 6 inch servo extensions Servo Y-Extension for aileron servos (or 5ch RX, and TX capable of running 2 aileron servos) Brushless Power Systems: Custom CDR Single, GWS 2205-15T outrunner, or sililar 70 to 100 watt outrunner.  LiPo Battery (from 800 to 1200 mAh) Brushed Power System: GWS EPS350 "C" Micro brushed ESC, 10A minimum GWS 9x7 2-blade prop 8-cell, 650 mAh NiMH battery

The current version of the fuselage manual is 1.0: J-3 Cub Fuselage Manual (1.12 MB)

The current version of the Clipped Wing manual is 1.0: J-3 Clipped Wing Manual (919 KB)