QUICK FLICK 2 DLG Full Kit:
(Designed by Paul Daniels)

• Wingspan: 50 in
• Wing Area: 259 sq in
• Weight: 6.5 to 7.5 oz
• Wing Loading: 3.5 to 4.0 oz/sq ft
• Airfoil: Drela AG-36

The QF2 is a Discus-Launch-Glier built up from laser cut balsa parts and carbon fiber components. It has been designed as an inexpensive great flying DLG that is capable of 120 foot launches and is easy to build.

The kit includes all laser cut balsa, tapered wrapped CF tailboom, CF material for spar strengthening, fiberglass for reinforcing the tails and fuselage, CAD drawn plans, push rods and housings, and misc. hardware.

Discussion, builds, and the evolution of the QF2 can be found on R/C Groups HERE.

Discussion on the QF2 can be found HERE.

Specifications: Wingspan: 50" Wing Area: 259 sq in Aspect Ratio: 9.7 Weight: 6.5 to 7.5 oz Loading: 3.5 to 4.0 oz/sq ft Airfoil: Drela AG-36 Kit Contents: Laser cut balsa and plywood Lightweight tapered carbon fiber tail boom Carbon fiber for spar strengthening Fiberglass for fuselage and tails Pushrods and pushrod housings Full size CAD drawn plans Misc. hardware Tools Needed: Sharp knife (#11 X-Acto) Sandpaper Razor plane (better) or sanding block

Items Needed to Complete: Thin and thick CA 5 minute epoxy Minwax Polycrylic or epoxy finishing resin for fiberglassing parts 2+ Ch Radio 2 Servos (GWS Pico, HS-55, or similar) Receiver RX Battery (4 cell 370mAh NiMH or smaller)

The current version is 1.0

QF2 Manual, Version 1.0 (2.0 MB)