The Tantrum™ has been designed from the ground up as an all out 3D performer. Weighing in at 12-13ounces AUW (with LiPolys) and with a wing loading of 5-6 oz/sq ft, the Tantrum™ will do amazing maneuvers in a small area.

All the sheet balsa and plywood is laser cut for quick, precise building.  The parts are dovetailed to make construction fast, straightforward, and reasonably foolproof.

The GWS EPS300C-D with a 12x6 prop will give you the power to climb vertical. Swap the EPS300 with a brushless in an EPS300 D gearbox and hang on to your socks.

Specifications: Wingspan: 37" Wing Area: 370 sq in Length: 37 in Weight: 12 to 13 oz Ready To Fly Wing Loading: 4.7 - 5.0 oz/sq ft Channels: 5 (Aileron x 2, Elevator, Rudder, Motor) Kit Contents: Laser cut wood Wheels Pull-pull wires and connectors Misc. hardware Tools Needed: Sharp knife (#11 X-Acto) Sealing Iron for covering Sandpaper Screwdrivers

Items Needed to Complete: 1 Roll SoLite (Covering) Thin and Thick CA 4+ Ch Radio 4+ Ch Receiver 4 ea. GWS Picos, HS-55, or similar servos 2 ea. 6 in servo extensions Y-Connector (If your TX does not have 2 aileron servo mixing) Minimum Power: GWS EPS350C-D 9.6V 950 KAN NiMH Battery Recommended Power: 100+ Watt Brushless Motor 3S 800+ MAh LiPo

3.9 MB video of the stock EPS motor and gearbox and NiMH batteries.

3.7 MB video with the Razor 350 brushless motor

3.8 MB video with the Razor 300 brushless motor

Tantrum Manual (979 KB)